Home › AS568-029
AS568-029 O-Ring Size
000 series · 1/16" cross section · Pneumatics, instrumentation, small static seals
Inside diameter × cross section
37.82 × 1.78 mm
1.489″ × 0.07″ ·
outside diameter 41.38 mm (1.629″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 1.489″ | 37.82 mm |
| Cross section (CS) | 0.07″ | 1.78 mm |
| Outside diameter (OD) | 1.629″ | 41.38 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 37.82 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -029 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 000 series
These share the same 1/16" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -028 | 34.65 | 1.364″ | 38.2 |
| -030 | 41.0 | 1.614″ | 44.55 |
| -027 | 33.05 | 1.301″ | 36.6 |
| -026 | 31.47 | 1.239″ | 35.03 |