Home › AS568-028
AS568-028 O-Ring Size
000 series · 1/16" cross section · Pneumatics, instrumentation, small static seals
Inside diameter × cross section
34.65 × 1.78 mm
1.364″ × 0.07″ ·
outside diameter 38.2 mm (1.504″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 1.364″ | 34.65 mm |
| Cross section (CS) | 0.07″ | 1.78 mm |
| Outside diameter (OD) | 1.504″ | 38.2 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 34.65 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -028 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 000 series
These share the same 1/16" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -027 | 33.05 | 1.301″ | 36.6 |
| -026 | 31.47 | 1.239″ | 35.03 |
| -029 | 37.82 | 1.489″ | 41.38 |
| -025 | 29.87 | 1.176″ | 33.43 |