Home › AS568-456
AS568-456 O-Ring Size
400 series · 1/4" cross section · Industrial flanges and piping
Inside diameter × cross section
291.46 × 6.99 mm
11.475″ × 0.275″ ·
outside diameter 305.44 mm (12.025″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 11.475″ | 291.46 mm |
| Cross section (CS) | 0.275″ | 6.99 mm |
| Outside diameter (OD) | 12.025″ | 305.44 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 291.46 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -456 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 400 series
These share the same 1/4" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -455 | 278.76 | 10.975″ | 292.74 |
| -457 | 304.16 | 11.975″ | 318.13 |
| -454 | 266.06 | 10.475″ | 280.03 |
| -458 | 316.86 | 12.475″ | 330.83 |