Home › AS568-276
AS568-276 O-Ring Size
200 series · 1/8" cross section · General purpose, cylinders
Inside diameter × cross section
278.99 × 3.53 mm
10.984″ × 0.139″ ·
outside diameter 286.05 mm (11.262″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 10.984″ | 278.99 mm |
| Cross section (CS) | 0.139″ | 3.53 mm |
| Outside diameter (OD) | 11.262″ | 286.05 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 278.99 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -276 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 200 series
These share the same 1/8" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -275 | 266.29 | 10.484″ | 273.35 |
| -277 | 291.69 | 11.484″ | 298.75 |
| -274 | 253.59 | 9.984″ | 260.65 |
| -278 | 304.39 | 11.984″ | 311.45 |