Home › AS568-265
AS568-265 O-Ring Size
200 series · 1/8" cross section · General purpose, cylinders
Inside diameter × cross section
196.44 × 3.53 mm
7.734″ × 0.139″ ·
outside diameter 203.5 mm (8.012″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 7.734″ | 196.44 mm |
| Cross section (CS) | 0.139″ | 3.53 mm |
| Outside diameter (OD) | 8.012″ | 203.5 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 196.44 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -265 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 200 series
These share the same 1/8" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -264 | 190.09 | 7.484″ | 197.15 |
| -266 | 202.79 | 7.984″ | 209.85 |
| -263 | 183.74 | 7.234″ | 190.8 |
| -267 | 209.14 | 8.234″ | 216.2 |