Home › AS568-260
AS568-260 O-Ring Size
200 series · 1/8" cross section · General purpose, cylinders
Inside diameter × cross section
164.69 × 3.53 mm
6.484″ × 0.139″ ·
outside diameter 171.75 mm (6.762″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 6.484″ | 164.69 mm |
| Cross section (CS) | 0.139″ | 3.53 mm |
| Outside diameter (OD) | 6.762″ | 171.75 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 164.69 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -260 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 200 series
These share the same 1/8" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -259 | 158.34 | 6.234″ | 165.4 |
| -261 | 171.04 | 6.734″ | 178.1 |
| -258 | 151.99 | 5.984″ | 159.05 |
| -262 | 177.39 | 6.984″ | 184.45 |