Home › AS568-247
AS568-247 O-Ring Size
200 series · 1/8" cross section · General purpose, cylinders
Inside diameter × cross section
117.07 × 3.53 mm
4.609″ × 0.139″ ·
outside diameter 124.13 mm (4.887″)
Dimensions
| Dimension | Inches | Millimetres |
|---|---|---|
| Inside diameter (ID) | 4.609″ | 117.07 mm |
| Cross section (CS) | 0.139″ | 3.53 mm |
| Outside diameter (OD) | 4.887″ | 124.13 mm |
Outside diameter is not measured, it is derived: OD = ID + 2 × CS.
If your measured OD disagrees with this, trust the ID and cross section — measuring
across the outside of a flexible ring is the least reliable of the three.
If you measured a used one
A ring pulled out of service will measure smaller than 117.07 mm, because compression set is permanent. If your measurement came in a little under this and the cross section roughly matches, -247 is very likely still the correct part. Ordering the size your worn ring measures is how the same failure repeats. More on this →
Nearby sizes in the 200 series
These share the same 1/8" cross section, so if the thickness is right but the diameter is off, your ring is probably one of these.
| Dash | ID (mm) | ID (in) | OD (mm) |
|---|---|---|---|
| -246 | 113.89 | 4.484″ | 120.95 |
| -248 | 120.24 | 4.734″ | 127.3 |
| -245 | 110.72 | 4.359″ | 117.78 |
| -249 | 123.42 | 4.859″ | 130.48 |